RooferJoe.ioAll Roof Pricer

RooferJoe vs EagleView

EagleView flies the aircraft, takes the pictures and sells you a measured report of one address. All Roof Pricer takes the picture you already have, lets you trace the roof, lays the roofing, prices the job and prints the proposal, for a flat monthly count. The two are not the same product, and All Roof Pricer imports EagleView reports when you have one.

Short version: EagleView gives you measurements, by the address, at a per-report price. RooferJoe gives you the measurements, the material count, the price and the paperwork, at $0.99 to $0.60 a roof.

Side by side

RooferJoe All Roof PricerEagleView
Where the picture comes fromAny aerial, satellite, plan, PDF or sketch you haveEagleView's own aerial photography
Who measuresYou trace it; the engine builds every facet true to pitchEagleView produces the report, usually within a day
Price per roof$0.99 to $0.60 at your plan's full countAbout $18 to $87 per report, by roof size and report type
Monthly price$99 to $299 per companyNone; pay per report
What you getDrawing, takeoff, laid material count, price, proposal, install ticketMeasurements, line lengths, pitch, area, waste table
Metal cut listYes, by facet and pooled, as CSVNo
Pricing the jobYour catalog, labor, markup, commission, taxNot included
RevisionsFree, from the same drawingNew report
Uses EagleView filesImports XML and JSON reports and checks totalsNative
Reports kept60 days on the account; PDF and job file yours to keepOn the account

EagleView figures come from third-party price guides checked in fall 2026, not from a published EagleView price list; get a current quote from EagleView before you compare.

When EagleView is the better pick

When RooferJoe is the better pick

Questions

Does RooferJoe replace EagleView?

For most residential bids, yes: trace the roof from an aerial image, set one known length, type the pitches and the engine builds every facet. When you have an EagleView report, All Roof Pricer imports it and checks itself against the report's own totals. It does not take aerial photographs; it works from the picture you already have.

How much does an EagleView report cost?

Third-party price guides put EagleView premium residential reports at about $18 to $87 depending on roof size and report type, with the basic report at the low end. EagleView does not list a public price for every report, so check with them for a current quote.

What does a RooferJoe report cost?

The Starter plan is $99 a month for 100 priced roofs, $0.99 each at the full count. Business is $299 for 500, $0.60 each. A report includes the drawing, takeoff, material list, price, proposal and install ticket.

How accurate is a traced roof against an EagleView report?

As accurate as the scale and the picture. Set the scale from one known length, trace the outline, and every facet is built true to the pitches you type. Typed and field-measured lengths override the image. On an imported EagleView report the import compares its totals against the report's summary and says whether it matches.

Can I import an EagleView report into RooferJoe?

Yes. The EagleView button takes the report's XML or JSON file. Every roof face becomes a facet with its eaves, hips, ridges, valleys, rakes, headwalls and sidewalls marked and its pitch set.

Plans from $99/month per company. 14-day free trial, no credit card, first report free. Cancel any time through Stripe.